• GELGOOG Machinery Co., Ltd
  • Professional Fry Machinery Solutions Provider
Tel:0086-15515573212 E-mail:sherry@gelgoog.com
BLOG
  1. Home > Cases & Blog >

Notes of frying machine operation

May 24, 2019 | sherry 171
It is very necessary for the operator to grasp the key points of the operation of the continuous automatic frying machine. Only in this way can we guarantee that no danger will occur. The key points include the following points:

1. The voltage is 380V, which is installed by a professional electrician.
2. The model and power of the matching motor are strictly in accordance with the requirements of the manual, and may not be selected at will. If it is a repaired motor, the speed and power should be re-tested by professional technicians, otherwise it will affect the normal operation and production of the machine.
3. After the machine is installed and the line electrical equipment is connected, manually move the running parts of the machine to see if any foreign objects fall into the inner cavity, so as to avoid damage to the machine after starting the motor.
4. The machine should be stable after installation and the fasteners should be tightened.
5. Adjust the V-belt of the transmission part properly to avoid affecting the quality during processing. (Note: the belt should be properly adjusted after each use of the machine for 100 to 200 hours)
6. When starting the machine, run for 3-5 minutes to check if there is any abnormality.
7. Non-productive maintenance and adjustment shall not be carried out while the machine is running.
8. After the machine has been running for a period of time, the bolts and nuts of each fastener should be re-inspected and tightened to avoid loosening and falling into the inner cavity to damage the machine.
9. Clean the oil tank and conveyor belt to remove foreign matter, dirt, and dry the water.
10. Visually check if the power cord is broken.
11. Check whether the appearance and function of the switch and indicator are abnormal.
12. Check if the connector is connected properly.
13. Check if the motor is abnormal.
14. Close the drain valve and fill the oil tank to the specified oil level.
15. Turn on the power.
16. Turn on the heating tube.
17. When the oil temperature reaches the set temperature, turn on the mesh belt motor to start the conveyor. Start the oil pump.
18. Set the frying time and put the fried food into the input.
19. The equipment is equipped with an automatic oil replenishment system, which can replenish the oil consumed during the use of the equipment at any time (to ensure that there is a sufficient amount of oil in the tank).
20. After the work is finished, close the heating pipe and continue the operation of the circulating oil pump to cool the oil.
21. Depending on the situation, choose to transfer the oil to the tank or to the fryer.
 
How does our Peanut Frying Machine work?



We are automatic frying machine manufacturers, what we have to do is to provide customers with quality machines. In addition, we also provide customers with the best service and the most patient guidance.If you have any questions about peanut frying machine,welcome to contact to us.
Email:emily@machienhall.com
Phone/Whatsapp:+8615538388305
Website:http://www.fryingm.com/products/peanut-fryer-machine.html